Can Damaged Alloy Rims Be Fixed?

Scratches and dents on your alloy rims will make your car look cheap. You may be wondering if it is possible to get rid of the ugly scratches on your wheels to make your car look classy again. Well, you can remove mild scratches and dents on your own.

However, if these scratches are running deep, you should be able to engage qualified refurbishment experts to do an outstanding job. If you are in Manchester UK, leading refurbishment companies like machesterdiamondcutalloys.co.uk will give you an exceptional service.

You can consider the following steps to remove mild scratches and dents at home:

1. Inspect your rim

First, you need to make it a habit to routinely carry out an extensive assessment of your rims for any damage. Some of the damage may be hidden by layers of dust and thus the need to clean the rim well before you do your inspection. Check the rims for any dings, dents, or scratches.

2. Remove all the dirt

Ensure you remove excessive layers of dust before you embark on fixing the damage on your ally rims. You should use the right material to do your cleanings, such as a mild cleaner or washcloth. Scrub and remove all the stuck dirt in your wheel. Spray the wheel with clean water to wash off the dirt. You should also extend your cleaning to cover the entire tire.

3. Use paint thinner

It would be best if you tried the try to clean your wheel using effective paint thinner. Paint thinners come with a specially formulated to effectively and efficiently remove any residual debris and dust that may settle on the wheel. Use a clean washcloth to paint the rim with a light coat of paint thinner. You can apply a little pressure to get rid of stubborn dirt that settles on the rim. Gently rub the area while you are applying more pressure until you are sure all the dirt is gone. Afterward, you should use clean water to wash off the paint and the dirt.

4. Dry the rim

Your rim must be kept dry before you start fixing the damages. A wet surface will make it impossible for the repairs to stick. After you have cleaned the wheels with fresh, clean water, you can dry them using a clean, dry piece of cloth. If it is possible, you can leave the wheel outside to air dry.

5. Sand and fill the damage

Using 240 grit sandpaper, you should then sand the scratches ways. You can hold the sandpaper over the scratches and dents and apply gentle pressure and rub the paper up and down several times until all the scratches are removed. It would help if you also repeated this action on marks until you feel a smooth surface. Then remove any dust from the surface using a clean cloth. Then fill up any stubborn scratches and dents with suitable metal-reinforced spot putty. Lastly, gently apply fresh paint to cover all your repairs.

Those are the simple steps that you can use to fix mild scratches. You can also keep yourself updated on important information on alloy wheel management like the 7Ways to Damage Your Alloy Wheels.